Brake Cooling Package, Full Kit – Miata MX5 (ND)

$599.95

Free shipping to Continental USA over $250.
Ships direct from Verus Engineering.
Up to 1 week lead time for items to ship.

Ships from Manufacturer

SKU: VE-A0114A Category:

Description

OVERVIEW

The Verus Engineering Full Brake Cooling Kit is configured in an OEM style format, with emphasis on the shortest route possible. Using the OEM fog lights as the inlet to the kit and a well-formed duct on the backing plate directing airflow into the center of the rotor. The inlet of the kit is a beautiful carbon duct that features a constantly decreasing cross-sectional area that promotes and improves flow through the brake cooling kit. The kit comes with everything necessary for an install, including pre-cut hose.

During the design process; we utilized in-house scan data from the ND. This resulted in a product that features a near OEM fit and finish.

The brake cooling kit was designed for owners looking to reduce brake fade and improve the thermal characteristics of the brakes on the ND Miata.

WHAT IS INCLUDED

  • Backing Plate Including Carbon Duct, Right-Hand

  • Backing Plate Including Carbon Duct, Left-Hand

  • Carbon Fog-Light Duct, Right-Hand

  • Carbon Fog-Light Duct, Left-Hand

  • 2.5″ High-Temp Silicone Hose, Cut to Size (2)

  • Stainless Hose Clamp (2)

  • Zip-Tie (8)

FEATURES

Carbon Fog-Light Ducts

Direct Air into the Center of the Rotor

Stainless Backing Plate Adds Even More Airflow into Center of the Rotor

OEM Type Install

Installs in a Few Hours With Minimal Hand Tools and Know-How

Short Routing to Maximum Cooling Efficiency

SPECIFICATIONS

Stainless Backing Plate

100% Carbon Fiber, 2×2 Twill, Autoclave Cured Carbon Fiber Ducts

Pre-cut High-Temp Silicone Brake Duct Hose

All Necessary Hardware Included

Made in the U.S.A.

Ultra-Sonic Cleaned Stainless Mesh as the 3rd Media for Separation

SCIENCE

Via tuft testing and thermal image testing, it’s quite clear that the brake cooling kit is highly effective even when used with the OEM rotors which have quite small vanes when compared to those of big brake kits. Smaller vanes will hurt flow and cooling due to the reduced size. With the brake cooling kit, the rotors remained much cooler directly after applying the brakes as well as after a short drive without using the brakes. It is also apparent that at high rates of speed, the brake cooling kit does significantly more than at lower speeds. This makes a lot of sense as the kit works by using frontal ambient air and funneling it into the center of the rotor. At higher speeds, pressure and flow rates are greater than at low speeds. We have heard reports back from customers tracking their cars having reduced brake fade, reduced rotor cracking, improved pad wear, and reduced brake fluid boiling. This is a great kit to help keep brake components at an appropriate temperature during competition and/or track days.

GOLF R FITMENT

Confirmed Exhaust Fitment

  • OEM
    AWE Switch Path

Exhausts That Require Modification

  • Neuspeed Stainless Steel Catback

  • Miltek Valved Catback

GOLF GTI FITMENT

Confirmed Exhaust Fitment

  • OEM

Exhausts That Require Modification

  • AWE Track Exhaust (bumper may need to be trimmed)

[expand title=”Click here to read more about Verus Engineering Shipping and Warranty”]

Please contact first to see if we can assist with any issue you have encountered.

SHIPPING

Shipping Regions Delviery Estimation

Verus Engineering ships via FedEx and USPS, both domestically and internationally. Estimated delivery times for domestic FedEx shipments are explained in above image.

TRACKING

Verus Engineering sends an email with tracking number for every order placed with a valid email address. Tracking is sent *to the email used during checkout* directly via the carriers. Please check your spam folders and/or your email specifically used during checkout.

ADDRESS CHANGE POLICY

If an address needs to be changed or updated, there will be a minimum charge of $10. This takes Verus time and resources to make the appropriate changes. We cannot guarentee that the address change will take place correctly but will do our best to facilitate it.

WARRANTY

Due to the nature of our business and the use of our parts, all of our products have a 1-year limited manufacturer defects warranty. If you have any questions regarding a warranty issue please do not hesitate to give us a call or shoot us a quick email.

TERMS AND CONDITIONS

All parts manufactured and sold under the Verus Engineering name are designed and manufactured with the intent to increase vehicle off-road performance and are not intended for use on public streets. Due to the nature of racing, all variances in conditions and use cannot be foreseen and therefore the safety of any person associated with use of our products is out of our control and we cannot be held liable for said event or any product failures due to unforeseen events or improper use or abuse when using products manufactured or sold by Verus Engineering.

Modification of any vehicle by installing parts manufactured by Verus Engineering could alter the vehicle’s on-road performance in the event of a crash, resulting in bodily harm or property damage. In purchasing any item from Verus Engineering, the purchaser hereby assumes full responsibility for any property damage or personal injury that may occur while using products manufactured and sold by Verus Engineering. Verus Engineering will not take responsibility for personal injury or property damage arising from usage or failure of parts manufactured and/or sold by Verus Engineering.

Do not purchase or install any part manufactured or sold by Verus Engineering if you do not agree with the above terms, and that you do not feel competent in installing safely and correctly. Improper installation or manufacturing procedures of DIY components can lead to personal injury or death, or property damage; a qualified professional should install all products, only skilled individuals should complete all DIY parts. Verus Engineering reserves the right to change pricing, material specifications, or any other specifications associated with their products without prior notification.

[/expand]

Additional information

Weight12 lbs
Dimensions18 × 12 × 6 in

Brand

Verus Engineering

Reviews

There are no reviews yet.

Be the first to review “Brake Cooling Package, Full Kit – Miata MX5 (ND)”
Make Model Year_ Trim
Mazda MX-5 Miata 2016-2020 Club 2dr Convertible (2.0L 4cyl 6A)
Mazda MX-5 Miata 2016-2020 Club 2dr Convertible (2.0L 4cyl 6M)
Mazda MX-5 Miata 2016-2020 Grand Touring 2dr Convertible (2.0L 4cyl 6A)
Mazda MX-5 Miata 2016-2020 Grand Touring 2dr Convertible (2.0L 4cyl 6M)
Mazda MX-5 Miata 2016-2020 Sport 2dr Convertible (2.0L 4cyl 6A)
Mazda MX-5 Miata 2016-2020 Sport 2dr Convertible (2.0L 4cyl 6M)
Mazda MX-5 Miata RF 2017 Launch Edition 2dr Convertible (2.0L 4cyl 6A)
Mazda MX-5 Miata RF 2017 Launch Edition 2dr Convertible (2.0L 4cyl 6M)
Mazda MX-5 Miata RF 2017-2019 Club 2dr Convertible (2.0L 4cyl 6A)
Mazda MX-5 Miata RF 2017-2019 Club 2dr Convertible (2.0L 4cyl 6M)
Mazda MX-5 Miata RF 2017-2019 Grand Touring 2dr Convertible (2.0L 4cyl 6A)
Mazda MX-5 Miata RF 2017-2019 Grand Touring 2dr Convertible (2.0L 4cyl 6M)